Duraseal Plus Stone, Concrete and Masonry Sealer
Duraseal Plus is a non-toxic sealer used for impregnating and treatment of concrete, stone, and masonry surfaces. Duraseal Plus is applied to above grade vertical and horizontal surfaces and is excellent for use on precast and poured concrete, paver and clay brick, mortar, grout, limestone, travertine, and concrete wearing surfaces. It is also used on residential interior or exterior walls, patios, sidewalks, parking decks, sports arenas, and industrial floors.
Duraseal Plus is a deep penetrating breathable water-based formula that is easy to use, VOC compliant, nonflammable, non-yellowing, and will not alter the appearance or texture of treated surfaces. After treatment, it reduces capillary absorption but does not clog pores resulting in a breathable surface.
Hard dense stone like granite or marble is not recommended for use with Duraseal Plus. Test your surface first by wetting with water; If water adsorbs and darkens then Duraseal Plus will seal and protect.
Duraseal Plus is
- Breathable
- Non-glossy
- Ready-to-use
- Non-Slippery
- Resists alkalinity
- Colorless, odorless
- VOC < 6 grams/liter
- Resists chloride salts
- Won’t change texture
Duraseal Plus treats
- Natural Stone
- Artificial Stone
- Parking decks
- Sports arenas
- Clay and Concrete Brick
- Cast and Poured Concrete
Approximate Coverage Rates⃰
- Brick: 150 to 250 ft2/p/gallon
- Concrete: 100 to 450 ft2 p/gallon
- Stucco: 100 to 300 ft2 p/gallon
- Stone: 85 to 500 ft2 p/gallon
- Paver Bricks 80 to 200 ft p/ gallon
- *Depending on porosity and texture, always test first for suitability and satisfaction
Packaging
- 5-Gallon pails – Order Online
- 55-Gallon drums – Contact us to Order
- 275-Gallon Totes – Contact us to Order
- Private labeling available
Duraseal Plus Installation